Skip to content

Manufacturer in Marktsteft, Germany

Welding table with 28 mm holes, made in Marktsteft, Germany

A welding table with holes is a thick steel plate with 28 mm bores in a 100 x 100 mm grid, into which you insert stops, clamps and clamping bolts. The manufacturer, die schmiede GmbH, builds these tables in Marktsteft, Germany: Standard with a 15 mm plate and PRO with a 25 mm plate, both plasma nitrided.

Request a quoteView all welding tables

PRO welding tables with a grid of holes, set up as a fixture from angles, screw clamps and aluminium profiles

What a welding table with holes does

A welding table with holes makes positioning parts repeatable: stops, squares and clamps sit in fixed bores instead of against scribed lines.

On the 100 x 100 mm grid you read distances and right angles directly from the table. Individual parts can be set up more quickly with accurate dimensions and angles, and the finished part needs less rework.

That helps with one-off pieces as much as with small batches, with flat structures such as railings as well as with three-dimensional assemblies, which you can also clamp vertically using the drilled side walls.

In English-speaking markets the same design is also sold as a fixture table, welding fixture table, clamp table, modular welding table or 3D welding table. Where these terms overlap and where they differ is explained in fixture table, clamp table and 3D welding table compared.

Which size and plate thickness suit your workpieces is covered in the guide to buying a welding table.

Hole grid of a welding table with 28 mm bores at 100 mm centres, engraved grid lines and a millimetre scale
28 mm bores in a 100 x 100 mm grid.

Steel welding table specifications at a glance

All steel welding tables from die schmiede have 28 mm bores in a 100 x 100 mm grid, measured from bore centre to bore centre. The shop calls this System 28.

Key data of the steel welding tables
FeatureValue
Bore diameter28 mm
Grid100 x 100 mm
Plate thickness15 mm (Standard) or 25 mm (PRO)
Material PROS355J2+N
Material StandardS355MC
Surfaceplasma nitrided
Side walls200 mm high, drilled
Working heightapprox. 865 to 965 mm

Welding tables, accessories and guides

A welding table with holes always works together with clamping tools. That is why this site covers tables and accessories for the same 28 mm system.

PRO welding table with a 25 mm plate and hole grid

Welding tables

Standard 15 mm, PRO 25 mm, stainless steel, large and custom sizes, with dimensions and weights.

All welding tables
Accessory set with clamps, stops and quick-release clamping bolts

Accessories

Clamps, stops, clamping squares, quick-release clamping bolts, accessory sets and extensions for 28 mm bores.

Browse accessories
Aluminium profiles held in a fixture of clamping squares and clamps on a PRO welding table

Guide

Buying advice, size and plate thickness, plasma nitriding, care and terminology explained.

Read the guide

PRO or Standard welding table?

PRO and Standard have the same hole pattern and the same grid. They differ in plate thickness, material and surface finish.

PRO, 25 mm

  • 25 mm plate in S355J2+N
  • plasma nitrided and surface ground, surface hardness approx. 850 HV
  • bores countersunk by 3 mm, corners and edges milled 3 to 6 mm
  • recommended total load up to 4,000 kg on 4 feet with evenly distributed load
  • sizes from 1000 x 1000 to 3000 x 1500 mm, seven of them also with diagonal holes

Standard, 15 mm

  • 15 mm plate in micro-alloyed fine-grain steel S355MC
  • plasma nitrided
  • underside reinforced six times with 140 x 15 mm flat bar
  • sizes from 1000 x 1000 to 2900 x 1400 mm
  • assembly kit for the legs and working height included

All data and sizes are listed on the pages PRO welding table 25 mm and Standard welding table 15 mm. For stainless steel work there is also a stainless steel welding table in 1.4301 with a 15 mm plate.

Manufacturer from Marktsteft, Germany

The welding tables on this site are made by die schmiede GmbH itself, a master metalworking business (Meisterbetrieb) in 97342 Marktsteft near Kitzingen in Lower Franconia, Bavaria.

Around 10 employees build railings, stairs, gates and canopies there for industry, exhibition stand construction and private clients. In the company's own workshop the welding table with holes is the tool for exactly this work, for example when building gates.

Custom sizes, diagonal holes and individual table legs are made on request, see large and custom sizes. Who is behind the tables is described under About us.

Type plate reading Manufactured in Germany by die schmiede on the black leg of a welding table
Type plate on the table leg: manufactured in Germany by die schmiede.

Where a welding table with holes pays off

A welding table with holes is worthwhile wherever parts are clamped again and again with accurate dimensions and angles.

  • Metal fabrication and steelwork: railings, gates, stairs and frames as one-off pieces
  • Small batches and fixture building with repeatable clamping positions
  • Tube work: prisms (V-blocks) give tubes up to 200 mm in diameter a stable support
  • Vertical set-ups using the drilled side walls and U-angles
  • Robot cells with the octagonal table on manipulators
  • Clamping and assembly in wood and plastics processing businesses

Examples from practice are shown in the gallery.

Rectangular metal frame clamped on a welding table with holes using clamps, stops and clamping squares
Welding table in workshop use.

Before you buy: the key questions

Before buying, settle four points: size, plate thickness, hole system and surface. The guide explains each of them separately.

Aluminium plate held by several clamps on the hole grid, with vertical stop squares behind it

Buying a welding table

What matters when buying, from plate thickness to accessories.

Read the buying guide
Cast corner connector on a welding table with a clamped aluminium profile above it

System 16 or System 28

Which hole system suits your parts and your accessories.

Compare the systems
Round tube clamped to the edge of a welding table with holes

Plasma nitrided

What the plasma nitrided surface means in everyday workshop use.

About the surface
Welding table in a workshop with a round tube fixed on the plate by two clamps

Size and thickness

Which size and plate thickness suit your workpieces.

Choose a size

Request a quote for your welding table

Tell die schmiede which size, plate thickness and accessories you need and where the table is to be delivered, and you will receive an individual quote. The online shop lists every size with current prices, but it is in German and delivers within Germany only.

Request a quote Online shop (German)

Frequently asked questions

What is a welding table with holes?

A welding table with holes is a work table made from a thick steel plate with bores at fixed spacing. On die schmiede tables the bores are 28 mm in diameter and sit in a 100 x 100 mm grid. You insert stops, clamping squares and clamps into the bores and clamp parts repeatably with accurate dimensions and angles. The drilled side walls let you build vertically as well.

Which welding tables does die schmiede offer?

There are two lines of plasma nitrided steel tables, Standard with a 15 mm plate and PRO with a 25 mm plate, plus a stainless steel table, an octagonal table and custom sizes. The stainless steel table is made of 1.4301, the octagonal table is designed for robot cells, and custom sizes are made on request. All tables have 28 mm bores. An overview of all sizes is on the welding tables page.

What hole diameter and grid do the tables have?

All die schmiede welding tables have 28 mm bores in a 100 x 100 mm grid, measured from bore centre to bore centre. The shop calls this System 28. Both the table top and the 200 mm high side walls are drilled. On the PRO tables the bores in the side walls are 50 mm apart, which gives more positions for clamping from the side.

Is a welding table with holes only for welding?

No, the table is also a clamping and assembly table. Parts can be aligned, clamped, tacked and assembled on it. Besides metalworking businesses, die schmiede explicitly names wood and plastics processing businesses as users. For robot cells there is an octagonal table measuring 1000 x 1000 x 200 mm, which is designed for use on manipulators.

How heavy is a welding table with holes?

A die schmiede welding table weighs approx. 215 to 1,520 kg, depending on size and plate thickness. According to the shop, a Standard table with a 15 mm plate in 2000 x 1000 mm weighs approx. 440 kg, and a PRO table with a 25 mm plate in the same size approx. 736 kg. Because of this weight, the tables are shipped on a pallet by freight forwarder.

Can I order a welding table for delivery outside Germany?

Yes, by requesting a quote: delivery to other countries is arranged by freight forwarder on request. The online shop schweisstisch.shop is in German and delivers within Germany only. Send the size, plate thickness, accessories and the delivery country and town through the contact form, and die schmiede will prepare an individual quote. Freight is delivered to the kerbside, so you need a forklift on site for unloading.

What our customers say

5.012 reviews on Google

All reviews on Google (opens in a new tab)

Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.